- For use in institutions, schools, universities,
commercial buildings where heavy duty reliable
operation is a requirement.
- ANSI A156.3, Grade 1 heavy duty exit device in
surface vertical rod and rim designs.
- Rail assemblies are heavy duty extruded aluminum
body with stainless steel push pad and end caps
are made of brass, bronze or stainless steel. Rail
travels in direction of the door swing.
- Trims are thru bolted for additional security.
- Conforms & Meets ADA Regulations.
- UL Listed for Panic and ULC10C,
UBC 7-2-1997 codes.
- UL Listed for Fire Exit Hardware. 3 hours.
- (A) label rating on pairs of doors up to 8’0” x 8’0”
swinging in same or opposite directions.
- Uncompromising security and safety in single and
double fire exit doors.
- Chassis mounted unit construction. Rim and
vertical rod devices are non-handed and easily
reversible.
- Available in many different functions. Lever and
escutcheon trims are grade 1 construction with
clutch free-wheeling mechanism. Rose and
escutcheon covers 161 cut out.
|
- All exit devices shall be of touch bar design
with smooth operation and be operative
over 2/3 of the door’s clear opening width.
- All exit devices must be listed under “Panic
Hardware” in the Accident Equipment List of
Underwriters’ Laboratories, Inc. Where
labeled doors are used as exits, they must
be equipped with labeled Fire Exit
Hardware and UL10C, UBC-7-2-1997
codes.
- All springs shall be of stainless steel
throughout.
- All exit devices shall be of chassis mounted
unit construction.
- All exit devices shall be ANSI A1563.3,
Grade 1.
 |
