Strikes and Accessories
Documents  Introduction  9800 & F9800  9860 & F9860  LBR9860 & F9860
Selector Chart  Trim Selection  Alarm Exit Hardware  Fire Exit Hardware 

Print Catalog Page

 ANSI A156.3, Grade 1
Strikes
(All Strikes are black nylon coated)
For use with 9860 Vertical Rod Exit Device


221
Standard for 9860. Applied to surface of floor or to a flat threshold. Standard packaging.


227
Applied to surface of stop. No mortise required. Standard packaging.


233
Bottom strike. Alternate bottom strike. Flush mounting stainless steel. Furnished with expansion shields. Requires mortise in the floor.

For use with 9800 Rim Type Exit Device


239
For 9800 surface applied. Standard Packaging.

Overlapping Strike


251
Surface applied. Used on inactive leaf for device on active leaf of pair of doors without mullion.

 For use with F9860 Vertical Rod Fire Rated Exit Device


245
Surface applied for F9860. Standard packaging.


233
Bottom strike for F9860. Flush mounting stainless steel. Furnished with expansion shields. Required mortise in the floor. Standard packaging.

For use with F9800 Rim Fire Exit Device


245
For F9800 surface applied. Standard Packaging.

Additional Strikes


LFF
Lock Front Filler.


SF
Strike Filler
Accessories

Mullions

Lockable and electric lockable mullions are available on request. 


418 - Removable mullion Aluminum painted ( Prime coat) includes top and bottom retainer supplied as a stock 96" for non fire rated applications.


424 - Fire exit mullion. 2" x 3" steel tubing round corner, iron construction with iron top and bottom retainers. To be used with two rim type devices on two independent active doors with full double door openings.
Additional Rods

Vertical rod for 10 feet high doors available on non fire rated vertical rod devices only. Use part # VRRD-10.

Glass Bead Shim Kits

801 - For rim type, 1/8" thick
806 - For vertical type, 1/8" thick
812 - For firerated vertical type, 1/8" thick
When exit devices are used with shim kits with outside trim, spindle length thumbpiece and thru bolt length must be increased accordingly.

 Cylinder Dogging Kits

Prefix "CD" before part#. Available for all 9800 Series devices except fore exit hardware. Cylinder dogging with a mortise cylinder is located on the mounting insert locks bolt in retracted position. 27" minimum door width is required.

To order kit only us part# 36CYLD9800 for 36" and 48CYLD9800 for 48" devices. Specify finish.