ANSI Product Standards - Cal-Royal Hinges complies with ANSI A156.1 (Butts and Hinges), A156.7 (Template hinge dimensions), A156.17 (Self Closing Hinges and Pivots), A156.18 (Materials and Finishes.)

Plain Bearing Standard Weight - For standard weight doors receiving low frequency service. Template hinges are furnished with all machine and all wood screws.

Ball Bearing Standard Weight - For standard weight doors receiving average frequency service. Template hinges are equipped with all machine and all wood screws.

Ball Bearing Heavy Weight - For heavy doors (such as entrance and corridor doors) or doors receiving high frequency service. Inner edges are beveled to conform to shape of barrel and to make close fitting joints. Heavy weight template hinges are equipped with all machine screws and one half wood screws.

Half Surface 5 Knuckle Template - For standard weight Kalamein doors with hollow metal jambs receiving average frequency service.

Half Mortise 5 Knuckle Template - For hollow metal doors with channel iron jambs receiving average frequency service.

Swing Clear - For use where conditions require a completely clear opening when door is open to 90 degree angle. Inner edges of leaves are beveled to conform to shape of barrel and to make close fitting joints. Phillips head threaded plug permits hinge to be reversed to suit application.

Materials and Finishes

Wrought Steel - Stain finishes or highly polished and plated. All plated finishes have a clear baked finish.

Wrought Stainless Steel - Satin finish non-ferrous, non-corrosive grade 304.

Stock Finishes - Refer to our price list for stock finishes. Materials such as solid brass are available on request. Prefix SB before part number.

Tips

Button - All hinges have flat button tip except concealed ball bearing hinges which is flush.

Non-removable Pins - Removable threaded set screw in barrel prevent pin from being removed when door is closed. Available on all hinges use N.R.P. for ordering.

Special Pins - Solid brass pins, stainless steel pins and Hospital Tips are available on request. Decorative Tips are also available on 4 1/2" x 4 1/2", 4" x 4", 3 1/2" x 3 1/2" commercial hinges and 4" x 4", 3 1/2" x 3 1/2" residential hinges. Add BT (Ball Tip), ST (Steeple Tip) before part number for specification.

Ball Tip	Steeple Tip

Packaging - All hinges are individually wrapped to protect the finish. Commercial grade hinges are packed 3 pieces/inner box with full machine and full wood screws. Residential hinges are packed on pair/box, bulk assembled, or unassembled. Spring hinges are packed 2 pieces/box. For carton quantities refer to price list.