Omega GRB Series
Functions  Part Numbers and Descriptions

Print Catalog Page
ANSI Grade 1
UL Listed, UL10C, UBC 7-2-1997
Construction Features:
This is an inside look at one of Cal-Royal's heavy duty locksets. Many superior construction features that combine great strength with satin smooth operation.

  1. Heavy duty crush-proof knobs
  2. Threaded roses hold lock firmly in place, tighten by special wrench furnished with each lock
  3. Corrosion treated steel housing 2- 1/16" diameter
  4. Anchor Spring
  5. Calibrated anchor for visible door thickness adjustment
  6. Long bearing length for smooth, wear resistant operation
  7. Cylinder knob removable for rekeying or replacement
  8. High precision 6-pin tumbler solid brass cylinder. Interchangeable with leading manufacturer cylinders
  9. 3" Diameter rose and mechanism adjustment for various door thickness
  10. Heavy gauge cold rolled steel spindles add greater strength and security
  11. Cast steel retractor with roller bearings and coil compression springs provide strength and durability
  12. 1/2" Throw solid brass latch bolt, reversible and adjustable for flat or beveled doors. UL listed for A label (3 hour) single swing door
  13. Friction grip nylon rings to resist roses loosening
  14. Easy operating turn/push button
Specifications:
  • Exposed Trim - Wrought brass, bronze or stainless steel.
  • Door Ranges - Adjustable for 1-3/8" to 2" door thickness.
  • Backset - Standard 2-3/4", 2-3/8" available.
  • Strike - ANSI strike (standard) 4 7/8" x 1 1/4". Optional "T" or full lip strike available.
  • Finishes - US32D, US10B, US3, US10. Other finishes not shown available subject to quantity and lead time.
  • Keying - 6-pin "C" keyway cylinder, 2 keys per lock.
  • Additional Keyways - Schlage E, Russwin D1, L4, Corbin 60, Sargent LA, Falcon/Weiser E, Arrow, Yale GA, Kwikset and Yale 8. Can also accept Medeco, Assa, and Kaba High Security Cylinders.
  • Bore Diameter - 1" for latch. 2 1/8" for lock housing.
  • Handing - Completely reversible
  • Electrical locks - Available on request.
  • Tactile & Lead Lining - Available on request.
  • Interchangeable Core - Interchangeable core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Prefix "IC" before part number. Available combinated or uncombinated. Temporary construction cores available. Factory keying with control key and masterkey available. IC core locksets are nonstock with factory lead time.
  • Packaging Includes:
    • UL Listed 2 3/4" backset, 2 1/4" x 1 1/8" faceplate
    • Standard "C", 6 pin cylinder
    • ASA Strike
  • Meets or exceeds requirements of BHMA/ANSI 156.2 series 4000 for grade 1 (FF-H-106C)
 Other Styles:

Plymouth style (equivalent to Schlage "D" series) is available. Subject to lead time.


GRB


G1PLY