Challenger Series SG Design Cylindrical Leverset
More Information
Documents   Introduction  Part Numbers and Descriptions  Comparison Chart		 ANSI Grade 2
Specifications:
  • Applications - For offices, schools, hospitals, apartments, hotel/motel and other public buildings.
  • Door Range - 1-3/8" to 1-3/4" thickness doors.
  • Backset - 2-3/4" Standard, 2-3/8", 3-3/4" and 5" optional.
  • Front - 2-1/4" x 1 1/8", adjustable for flat or beveled doors 1/8" in 2".
  • Strike - ASA strike standard, "T" and full lip strike available on request.
  • Latchbolt - 1/2" Throw solid brass, reversible for RH or LH applications. UL listed.
  • Latch and Stick Screws - 8-32 X 1" FPH dual purpose.
  • Packaging Includes
    • 2 3/4" backset (2 1/4" x 1", Square corner packed with 1/8" filler for 1 1/8" width ). 2 3/8" available on request.
    • 2 3/8" available on request.
    • All locksets are packed with ASA strike.
    • Standard "C" rekeyable 6 pin cylinder.
  • ANSI Standards - Meets or exceeds requirements of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles.
  • Exposed Trim - Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
  • Keying - 6-pin "C" keyway cylinder, 2 keys per lock. Keying as per individual job requirement.
  • Cylinders & Keyways - 6 pin solid brass "C" keyway standard
  • Schlage C-K, Russwin D1, Corbin 60, Sargent LA, Falcon/Weiser E, Arrow, Yale 8, Yale G, KWIKSET KW (Optional). Can also accept medeco, ASSA, and KABA high security cylinders.
Finishes Available:
BHMA Symbol US Code Description
605 3 Polished Brass
612 10 satin bronze
613 10B Oil Rubbed Bronze
625 26 Bright Chrome
626 26D Satin Chrome
606 4 Satin Brass

Other finishes available with lead time.

 Dimensions:

The lever features a 3/8" return and projection of 2-3/8" from the face of door.
Functions:
Entrance / Office Lock
Turn/Push button locking. Pushing and turning button locks outside knob requiring use of key until button is manually unlocked. Pushing button locks outside knob until unlocked with key or inside knob is turned.
Classroom Lock
Dead locking latch bolt operated by lever from either side except when outside lever is locked from outside by key. When outside lever is locked, latch bolt is operated by turning inside lever.
Storeroom Lock
Outside lever fixed. Entrance by key only. Inside lever always unlocked.
Privacy Lock
Latch bolt operated by lever from either side. Outside lever is locked by push button inside and unlocked by emergency release outside. Turning inside lever or closing door release push button.
Passage Set
Latch bolt operated by lever from either side at all times.
Dummy Lever
Single dummy trim for one side of door. Pull only
Exit Lock
Blank plate outside. Inside lever always unlocked.