Surface Vertical Rod

Rim | Surface Vertical Rod | Surface Vertical Rod LBR | Selector Chart | Alarm Exit Hardware | Strikes and Accessories | Trim Selection | Power Supplies | Concealed Vertical Rod | Mortise Rim | Narrow Stile Exit Device | Delayed Egress | Templates | General Information | Print Catalog Page

7760 & F7760 Series
Grade 1 Vertical Rod Type Exit Device

Specifications:

CONFIGFURATION MAX FRAME DIMENSIONS LOCK TYPE DESIGN PRESSURE (PSF)
INSWING/OUTSWING
POSITIVE NEGATIVE
SINGLE 40" x 88" F7700V Series +70.0 -70.0
DOUBLE 76" x 88" F7700V Series +70.0 -70.0

Dimensions

Touchbar height to finished floor 41" (1041mm) at center
Touch bar projection - neutral 3 5/8" (92mm)
Touch Bar Projection - depressed 2 7/8" (73mm)
Center case 8-1/16" x 2 3/4" x 2 1/2" (205mm x 70mm x 64mm)
Panic grade top & bottom latch case 3-15/16" x 2 1/8" x 1 3/8" (100mm x 54mm x 35mm)
Fire Grade top latch case 3-5/16" x 2-9/16" x 2-1/16" (100mm x 65mm x 53mm)
Fire grade Bottom latch case 3-15/16" x 2 1/8" x 1 3/8" (100mm x 54mm x 35mm)
Top and bottom rod length for 36" x 84" doors Top rod 37 ½" (953mm), bottom rod 35 5/8" (905mm)
Top and bottom rod length for 48" x 96" doors Top rod 49 5/8" (1260mm), bottom rod 35 5/8" (905mm)
Vertical rods ½" (13mm) round tubing
MODEL ACTUAL SIZE MAX. CUT DOWN DOOR SIZE
7700EO36, F7700EO36, 7790V3696,
F7790V3696, and 7750V36120
32" 6" 30" to 36" door width
7700EO48, F7700EO48, 7790V4896,
F7790V4896, and 7750V48120
44" 10" 38" to 48" door width

Minimum Stile Requirements

Double door - with two vertical rod type exit devices.

3 ½" Min. Stile