Trim Selection

Rim | Surface Vertical Rod | Surface Vertical Rod LBR | Selector Chart | Alarm Exit Hardware | Strikes and Accessories | Trim Selection | Power Supplies | Concealed Vertical Rod | Mortise Rim | Narrow Stile Exit Device | Delayed Egress | Templates | General Information | Print Catalog Page

7700 Series Trim Selection
ANSI A156.3, Grade 1

Trims for Surface Mounted Panic Bar
(Rim and Surface Vertical Rod)

Lever Design

GN Design AT Design Spa Design
TUB Design 8000K  
 

When ordering "AT" and "SPA" designs, prefix design name before part number. Example: ENTOOL in "AT" design is ATENTOOL.

Keyway

6 pin solid brass "C" keyway standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High Security Cylinders.

Escutcheon Lever Design

Construction

  • Rigid, non clutch mechanism.
  • Double heavy duty spring support to prevent sagging and enhance operation.
  • Grade 1, thru-bolted design. Non-handed design. Easily field reversible.
  • Hardened steel heavy duty tailpiece. Available for fire and non fire rated rim and vertical rod exit devices.

Door Thickness

Standard 1 ¾". For 2 ¼" thick door use additional part# TAIL3.

Escutcheon Dimensions

2 ¾" width x 10 ¼" length. Lever length: 4 ¾". Fits and covers 2 1/8" 161 cutout.

  • ESC7700 or ICESC7700 or ICSCESC7700 - ENTRANCE
    • Rigid Entrance, key locks or unlocks escutcheon trim.
    • Operates as classroom function.
    • ANSI Function - 63
  • ESC7705 or ICESC7705 or ICSCESC7705 - STOREROOM
    • Rigid Storeroom, key unlocks lever, lever retracts latch bolt, otherwise always locked.
    • ANSI Function - 04
  • ESC7730 - PASSAGE
    • Trim always operable and free
    • ANSI Function - 62
  • ESC7740 - DUMMY
    • Dummy Escutcheon trim. One sided.
    • ANSI Function - 10
To order other lever design insert "AT" or "RL" before "ESC:". e.g. ATESC7700 for ESC7700 with AT design or RLESC7700 for ESC7700 in RL Design

Keyway

6 pin solid brass "C" keyway mortise cylinder standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders.

  • (IC) INTERCHANGEABLE CORE
    • Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW
  • (ICSC) INTERCHANGEABLE CORE
    • Indicates function available with Schlage Full size format Interchangeable Core.

Pull Design

7700NL or IC7700NL or ICSC7700NL 7700 DTP 7700 EOP
  • For Rim Devices Only
  • Outside by pull and key.
  • Key retracts latch bolt.
  • ANSI function - 03.
  • Covers 161 cutout.
  • 6 pin solid brass "C" keyway Rim Cylinder standard.
  • Architectural plated finishes
  • Outside by pull only.
  • Pull when dogged.
  • ANSI Function - 02
  • Covers 161 cutout
  • Outside by plate only.
  • Pull when dogged.
  • ANSI function - 10
  • Covers 161 cutout.

Thumbpiece Trim

(Operates on Rim & Vertical Rod Devices)

  • 77TP00 or IC77TP00 or ICSC77TP00- ENTRANCE
    • Key locks or unlocks thumbpiece.
    • Operates as classroom function.
    • ANSI Function - 63
  • 77TP05 or IC77TP05 or ICSC77TP05 - STOREROOM
    • Key unlocks thumbpiece, thumbpiece retracts latch bolt, otherwise always locked.
    • ANSI Function - 04
  • 77TP30 - PASSAGE
    • Trim always operable and free
    • ANSI Function - 62
  • 77TP40 - DUMMY
    • Dummy trim. Includes blank Mortise dummy cylinder.
    • One sided.
    • ANSI Function - 10

Finishes

Architectural plated finishes

Keyway

6 pin solid brass "C" keyway standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders.

  • (IC) INTERCHANGEABLE CORE
    • Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW
  • (ICSC) INTERCHANGEABLE CORE
    • Indicates function available with Schlage Full size format Interchangeable Core.

Electrified Lever Trim

Cal-Royal's electrified lever trim provides remote locking and
unlocking capabilities while incorporating the patented clutch trim
design. The 24V DC solenoid can be energized from a distant
controller, thus allowing access control of the opening.

The control of stairwells in high-rise buildings is a common
application for this trim, where electric pullback of the exit
device's latchbolt is cost prohibitive or not required. This is
especially practical in applications where fire/life safety codes
require a "fail-safe" condition which is not an option with
electrified latch pullback devices. Because the current draw is
quite low there is no need for a more expensive power supply to
provide the surge current.

Features

Options

Specifications

Solenoid....................................... Continuous Duty 24VDC
Operating Voltage........................ 12 or 24VAC/DC + OR - 10% (must specify 12 or 24 volts when ordering)
Amperage..................................... 260mA@12V / 160mA@24V
Coil Resistance............................ 12V=49Ω / 24V=159Ω
 

To order, Specify:
OPTIONS: FAIL SAFE (FS)
                FAIL SECURE (FSE)

ITEM # DESCRIPTION
FS12 ESC77 TRIM FS12 FAIL-SAFE OPTION 12V AC/DC
FS24 ESC77 TRIM FS24 FAIL-SAFE OPTION 24V AC/DC
FSE12 ESC77 TRIM FSE12 FAIL-SECURE OPTION 12V AC/DC
FSE24 ESC77 TRIM FSE24 FAIL-SECURE OPTION 24V AC/DC
To order other lever design insert "AT" or "RL" before "ESC:". e.g. ATESC7700 for ESC7700 with AT design or RLESC7700 for ESC7700

(ELR)Electrical Latch Retraction

Our electrified latch pullback exit device allows for remote keyless access control in high occupancy/high traffic conditions where exit devices are required. Common applications include conditions such as hospitals, airports, schools, churches and they are commonly specified in applications that require automatic door openers. The device may be continuously energized allowing for a push/pull condition if desired.

Features

Specifications

Voltage.......................................24VDC
Amperage..................................... Surge current - 6.5A for 150ms@24V / Holding - 250mA@24V
Coil Resistance............................ 3.7Ω
 

To order, Specify:

CANNOT BE COMBINED WITH REGULAR DOGGING, CYLINDER DOGGING, AND ALARM KITS

Signal Switch RX and LX

RX (request to exit) signal switch is used to signal the use of an opening from the push side. When the push pad is depressed, the switch is activated. These devices are equipped with an internal SPDT (single pole double throw) switch that monitors the touch bar.

LX (latch bolt monitoring) signal switch monitors both egress and access of an opening. When the latch bolt is retracted, the switch is activated. These devices are equipped with an internal SPDT (single pole double throw) switch that monitors the latch bolt position.

LX and RX switches can be combined.

LX, RX switches can be used in combination with EL (electric latch retraction) option.

Specifications

RX or LX Switch rated 0.5 amps @ 24VAC/DC resistive
Low current RX or LX Switch rated 0.5 amps @ 24VAC/DC resistive

For Factory Installed:
To Order, Specify:
Prefix: RX...................Request to Exit switch for field installation
           LX...................Latch bolt Monitoring switch for field installation
           LXRX.................Latch bolt Monitoring/Request to Exit Combination

Trims for Narrow Stile Exit Device

PULL DESIGN FOR GLS7700 RIM EXIT DEVICE ONLY

  • 98GLSNL - IC98GLSNL - ICSC98GLSNL
    • Outside by pull and key.
    • Key retracts latchbolt.
    • ANSI function - 03
    • (Specify Handing)
  • 98GLSUP
    • Outside by pull only.
    • Pull when dogged.
    • ANSI function - 02
    • (Non-Handed)
  • GLSRIMEOP
    • Outside cover plate only.
    • ANSI function - 10

Keyway

  • 6 pin solid brass "C" keyway
  • Rim Cylinder Standard

Finishes

  • Architectural plated finishes.
98GLSCYL-1IC98GLSCYL-1
ICSC98GLSCYL-1
OFSTPUL-10
(REVERSIBLE)
 Outside by pull only

(IC) INTERCHANGEABLE CORE - Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW.
(ICSC) INTERCHANGEABLE CORE - Indicates function available with Schlage Full size format Interchangeable Core.

Keyway

6 pin solid brass "C" keyway Mortise Cylinder standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders.

ESCUTCHEON LEVER DESIGN

FOR GLS9800 RIM & GLS9800 CONCEALED VERTICAL ROD

IMPORTANT: GLS7700 and GLSCVR7700 Trims are interchangeable with GLS9800 and GLSCVR9800 Trims


ELECTRIFICATION NOT AVAILABLE FOR TRIM. Electrical Latch Retraction (ELR), Request to Exit (RX) and Latchbolt Monitoring (LX) available for Exit Device only.

Construction

  • Free-wheeling clutch mechanism.
  • Grade 1, thru-bolted design. Reversible design.
  • Hardened steel heavy duty tailpiece. Available for rim and concealed vertical rod exit devices.

Keyway

6 pin solid brass "C" keyway Mortise Cylinder standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders.

Door Thickness

Standard 1 3/4".

Escutcheon Dimensions

1 13/16" width x 8" length
Lever length: 4 3/4"

GLSRIM9800
GLSCVR9800
ICGLSRIM9800
ICSCGLSRIM9800
ICGLSCVR9800
ICSCGLSCVR9800
ENTRANCE Clutch free-wheeling Entrance, key locks or unlocks escutcheon trim ANSI FUNCTION (63) Operates as classroom function CVR is used for Concealed Vertical Rod Exit Device RIM is used for Rim Type Exit Device
GLSRIM9805
GLSCVR9805
ICGLSRIM9805
ICSCGLSRIM9805
ICGLSCVR9805
ICSCGLSCVR9805
STOREROOM Clutch free-wheeling Storeroom, key unlocks lever, lever retracts latch bolt, otherwise always locked ANSI FUNCTION (04) CVR is used for Concealed Vertical Rod Exit Device RIM is used for Rim Type Exit Device
GLSRIM9830 GLSCVR9830 PASSAGE Trim always operable and free ANSI FUNCTION (62) CVR is used for Concealed Vertical Rod Exit Device RIM is used for Rim Type Exit Device
GLSRIM9840 GLSCVR9840 DUMMY Dummy Escutcheon trim ANSI FUNCTION (10) CVR is used for Concealed Vertical Rod Exit Device RIM is used for Rim Type Exit Device

(IC) INTERCHANGEABLE CORE - Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW.
(ICSC) INTERCHANGEABLE CORE - Indicates function available with Schlage Full size format Interchangeable Core.

Trims for Grade1 Mortise Lock Exit Device
MR7700 and FMR7700
Escutcheon Lever Design

Exit Device standard packaging includes Mortise Lock Case. Trims sold separately.

Construction

  • Refer to Mortise Lock NM Series for product information

Finishes

Architectural plated finishes.

Door Thickness

Standard 1 3/4".

Keyway

6 pin solid brass "C" keyway Mortise Cylinder standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders.

Escutcheon Dimensions

2" width x 8 1/2" length. Lever length: 4 3/4".

MRESC-00
ICMRESC-00
ICSCMRESC-00
ENTRANCE Key locks or unlocks lever Operates as classroom function ANSI FUNCTION (63)
MRESC-05
ICMRESC-05
ICSCMRESC-05
STOREROOM Key retracts latch bolt, otherwise always locked ANSI FUNCTION (04) *MUST USE MR98005EO36/48 Mortise Rim Exit
MRESC-30 PASSAGE Trim always operable and free ANSI FUNCTION (62) *MUST USE MR98005EO36/48 Mortise Rim Exit

(IC) INTERCHANGEABLE CORE - Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW.
(ICSC) INTERCHANGEABLE CORE - Indicates function available with Schlage Full size format Interchangeable Core.

Trims for Concealed Vertical Rod (Wood & Metal)
MCVR7700, FMCVR7700, WCVR7700 & FWCVR7700
Escutcheon Lever Design

ELECTRIFICATION NOT AVAILABLE FOR TRIM. Electrical Latch Retraction (ELR), Request to Exit (RX) and Latchbolt Monitoring (LX) available for Exit Device only.

Construction

  • Free-wheeling clutch mechanism
  • Grade 1, thru-bolted design
  • Non-handed design. Easily field reversible.
  • Hardened steel heavy duty tailpiece available for fire and non-fire rated rim and concealed vertical rod exit devices.

Finishes

Architectural plated finishes.

Door Thickness

Standard 1 3/4".

Keyway

6 pin solid brass "C" keyway Mortise Cylinder standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Sargent LA-LB-LC, Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders.

Escutcheon Dimensions

2 15/16" width x 8 1/2" length. Lever length 4 3/4". Fits and covers 2 1/8" 161 cutout.

CVRESC7700
ICCVRESC7700
ICSCCVRESC7700
ENTRANCE Clutch Entrance, key locks or unlocks escutcheon trim ANSI FUNCTION (63) Operates as classroom function
CVRESC7705
ICCVRESC7705
ICSCCVRESC7705
STOREROOM Clutch Storeroom, key unlocks lever, lever retracts latch bolt, otherwise always locked. ANSI FUNCTION (04)
CVRESC7730 PASSAGE Trim always operable and free ANSI FUNCTION (62)
CVRESC7740 DUMMY Dummy Escutcheon trim ANSI FUNCTION (10)

(IC) INTERCHANGEABLE CORE - Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW.
(ICSC) INTERCHANGEABLE CORE - Indicates function available with Schlage Full size format Interchangeable Core.

Heavy Duty Keyless Door Locks

MECHANICAL CRCODE101

  • For Use with Rim & Vertical Exit Devices
  • Heavy Duty
  • Designed for 9800 and 7700 series, Grade 1 Panic Exit Device
  • Up to 8000 code combinations
  • Weather-resistant finish
  • Code can be changed anytime without dismounting
  • Full size, non-handed lever handle
  • Easy Installation
  • Reversible Handing

ELECTRONIC CRCODE007

  • For Use with Rim Exit Devices only
  • Dual mode for code free entry either mechanically by key or electronically thru the keypad
  • Designed for 7700 and 9800 Series Exit Devices
  • Can store up to 90 different numeric user codes in 4, 5 or 6 digits
  • Settings remain in memory when batteries are removed
  • Audible alarm sounds after 3 incorrect attempts
  • Connection available for remote release switch and automatic lock activation when linked to Fire Alarm Systems
  • Can be used as STOREROOM or CLASSROOM function
  • Factory default set as STOREROOM function
  • Fast and easy programming via master code

CR4000 & CR5000 TRILOGY® KEYLESS EXIT TRIM

  • CR4000 Trilogy® Keyless Exit Trim (for 9800 Series Exit Devices)
  • CR5000 Trilogy® Keyless Exit Trim (for 7700 Series Exit Devices)
  • For use with Rim Exit Devices only
  • Clutch mechanism insures long life and durability
  • Fingertip and/or Windows Programmable
  • 2000 User Codes: Master, manager, supervisor and users
  • Real Time Clock for up to 40,000 Event Time/Date-Stamped Audit Trail
  • Up to 500 Lock/Unlock Schedules (with Time Zone Support)
  • Rugged 12-Button Metal Keypad
  • Non-Handed; Fully Field Reversible
  • Adaptable to most major manufacturers of standard RIM and IC RIM Cylinders
  • Battery operated; uses 5 AA batteries
  • For Technical Support call: 1-800-ALA-LOCK

KABA® - Cal-Royal Combination

Cal-Royal's Exit hardware devices combined with Kaba InSync CP provide a variety of alternatives when addressing community access control. Recommended for applications such as controlling building entry openings, common area rooms and doors with exit devices. InSync CP are available as stand-alone battery operated door locks designed to work in conjunction with Cal-Royal's Exit Hardware Devices.