Electrification & Power Supplies

Rim | Surface Vertical Rod | Surface Vertical Rod LBR | Selector Chart | Fire Exit Hardware | Alarm Exit Hardware | Strikes and Accessories | Trim Selection | Mortise Rim | Concealed Vertical Rod | Electrification & Power Supplies | Comparison Chart | Narrow Stile Exit Device | ADA Compliant Hardware | Templates | General Information | Print Catalog Page

Power Supplies for
Electrified Exit Devices

Complete accessory kit to convert 36" & 48" devices. Door is secure without power. Door is unlatched electronically. Latchbolt retracted by pushpad inside or electronically by adding power.
  • Features:
  • Fast, quiet and smooth operation - You'll feel the difference
  • Low surge current draw
  • MM3 module is compatible with most 24VDC, 1A (or greater) regulated power supplies
  • Electric dogging
  • If push pad is pulled from open position, MM3 will re-set itself & pull back the latch without fail
  • "PTS" Electronic adjustment for latchbolt travel.
  • On-board self diagnostics for fast, easy troubleshooting at the opening.
  • 6' cable with Quick Connect for MM3 module
  • Up to 700' wire run with 18/2 wire to power supply, saves cost.
  • 3-year "no hassle" warranty issues reliability to the owner
  • Specifications:
  • Operating Voltage range – 22 to 30 VDC
  • System protection – unit shutdown when voltage exceeds 31VDC
  • Current Peak – 1A
  • Current Hold – 125mA
The modification of the Cal Royal NESC22, NESC77 and NESC98 exit trim is perfect for stairwell conditions or applications where electric pullback of the exit device's latchbolt is cost prohibitive or not required. This is especially practical in applications where fire/life safety codes require "fail safe" condition which is not an option with electrified latch pullback devices.
  • Features:
  • Field reversible
  • 12 or 24 VDC
  • Rated for continuous duty
  • Low current draw
  • 3-Year Warranty
  • Specifications:
  • Operating Voltage: 12 or 24 VAC/DC
  • Amperage: 12V = 250 mA; 24V = 150 mA
  • Solenoid coil resistance: 12V = 49Ω; 24V = 159Ω
The CRPS1N is a heavy duty, high quality, low cost solution for powering a single latch retracting exit device. The solid state design insures years of trouble-free operation. The power supply delivers raw, unregulated DC current which is ideal for the extreme in-rush requirement of most solenoid driven electric latch retracting exit devices. The power supply comes housed in a sturdy, yet compact metal enclosure.
  • Features:
  • Power supply delivers the necessary high current in-rush for a single exit device
  • Solid-state design eliminates problems associated with mechanical relays
  • Single input/output
  • Specifications:
  • Input voltage - 120 VAC
  • Output voltage - 24 VDC unregulated at 1A
  • Temperature range - 0 to 120F
  • 1 Solid-State input/output (input triggered by dry contact)
  • LEDs - RED = Power indicator, GREEN = Channel on
  • Enclosure dimensions: 10" x 10" x 4"
The CRPS2 Series power supplies are high quality, cost effective solution for powering two electric latch-retracting exit devices. These power supplies provide the necessary surge current that most latch-retracting exit devices require. The CRPS2 Series offers features found on power supplies costing much more; and the solid-state design and careful attention to detail make the CRPS2 Series ideal choice for the discerning user who requires a power supply that can offer years of trouble-free operation.
  • Features:
  • Delivers the necessary in-rush current to power two latch pullback exit devices.
  • Two independent inputs/outputs
  • Solid-state design eliminates mechanical problems associated with relays
  • Thermal overload sensing reduces risk of failure due to overheating
  • Fire alarm disconnect link
  • Inputs triggered by dry contact
  • Intelligent short circuit detection detects shorts much faster than fuses and isolates the short to the individual output
  • Removable Euro-style terminal blocks allow for easy installation
  • UL Pending at time of print
  • No hassle 3-Year Warranty
  • Specifications:
  • Input voltage - 120 VAC
  • Output voltage - 24 VDC unregulated at 2A**
  • Temperature range - 0 to 120F
  • 1 Solid-State input/output (input triggered by dry contact)
  • LEDs - RED = Power indicator, GREEN = Channel on
  • Enclosure dimensions: 10" x 10" x 4"**
  • **CRPS2 Only
  • Additional Features:
  • Efficient battery backup/charging circuitry with zero voltage drop at power loss
  • Solid state reverse polarity protection for battery connections
  • Audible alert when sensing AC power failure & low battery (batteries not included)
  • Output Voltage - 24 VDC unregulated at 2.3A
  • Enclosure dimensions: 12.5" x 15" x 4"
The CRSW3 power supply is a low cost, regulated switching power supply. It is designed specifically to supply power to low current DC devices such as mortise locks, cylindrical locks and electric strikes. The CRSW3 supplies 2.4A at 27VDC and provides (3) non-fused outputs. The CRSW3 comes housed in a 10" x 10" x 4" sturdy metal enclosure.
  • Features:
  • Adjustable output voltage(22-27V under load)
  • No hassle 3-Year Warranty
  • Specifications:
  • Input voltage - 110 or 240 VAC
  • Output voltage - 2.4A @ 27VDC
  • (3) Non-fused outputs
  • Enclosure dimensions: 10" x 10" x 4"