Distribution Centers | DKS Doors

323.888.6601

Back To Top

Lites and Louvers in Prime Coat

Vision Lite Low/Standard Profile

  • For 3/16", 1/4", and 1" thick glass frames
  • For use in Fire-Rated door applications under positive and neutral pressure.
  • Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI CODE 0870 00.

Divided Reverse “Y” Blade, Inverted Louvers / Inverted Y-Blade Louvers

  • 90 Minute Fire Rated Steel Louvers
  • For use in fire-rated door applications under positive and neutral pressure Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), NFPA 252 (2012), CSI CODE 08 90 00 Louvers and Vents.

Adjustable Fusible Link Louvers

  • Recommended for use in rooms where ventilation is needed and at the same time isolating the room whenever fire is present.
  • When louver is exposed to heat at 165°F, the fusible link trips and the spring loaded louver blades shut to form an air tight fire and smoke seal.
  • WHI Listing Mark with a 60-90 Minutes Fire Rating is stamped on the frame of the louvers.
  • Installation is easy.
  • No need to drill holes for fasteners.
  • All screws are mounted on the room side leaving the corridor side free of fasteners for security purposes.
  • Fuses are replaceable.

Vision Lite Low/Standard Profile Kit

  • Vision Lite Frame
  • Glass types are Non-Fire Rated Tempered (¼”), Fire Rated PROTECT3™ Wired Safety (¼”) and Pyran® Platinum F Glass (3/16”)
  • Glazing Tape Combination
  • For use in fire rated door applications under positive and neutral pressure.
  • Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI CODE 0870 00.

CHALLENGER SERIES – SQUARE ROSE

For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.

  • BHMA Certified Lifetime Warranty, GRADE 2
  • Conforms with ANSI A 156.2 Series 4000, Standard Duty, Barrier Free,
  • UL listed 3-hour rating, conforms to standards UL10C and UBC 7-2-1997
  • Solid brass 6 pin “C” keyway cylinder, optional other keyways
  • Optional Interchangeable Core
  • Push in and turn button function
  • Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
  • Optional Tactile and Lead Lining
  • Meets the Buy American Act
   

CR271PC POCKET DOOR CLOSER APPLICATION

CR271PC is the CR441 Series’ Pocket Door Closer.  It is the same CR441 (cylinder) body specially re-engineered for pocket door closer applications. It uses a higher tensioned steel spring, combined with a high-performance hydraulic fluid to withstand high-demand performance applications. Due to the higher force required to open the door 180 degrees, a heavy duty lever forged steel arm was designed 1” longer than the standard CR441 arm for an extra smooth action.

DOOR VIEWERS IN US19 BLACK FINISH

DOOR VIEWERS Conforms to ANSI /  BHMA A156.16 L23172
  • DV90 Brass Door Viewer, 160° Plastic Lens Bore:  ½” For Doors:  1 ⅜” - 2 1/4” thick
  • DV91 Brass Door Viewer, 180° Plastic Lens Bore:  ½” For Doors:  1 ⅜” - 2” thick
  • DV180 Brass Door Viewer, 180° Plastic Lens Bore:  9/16” For Doors:  1 ⅜” - 2” thick
  • ULDV160 Brass Door Viewer, 160° Glass Lens UL-Listed for 90-minute Doors Bore:  ½” For Doors:  1 ⅜” - 2” thick
  • ULDV200 Brass Door Viewer, 200° Glass Lens UL-Listed for 90-minute Doors Bore:  9/16” For Doors:  1 ⅜” - 2 1/4” thick
 

Flush Pulls

Flush Pulls are used on any door with "flush with the door face", these pulls allow doors to slide in front of one another without getting hung up on the hardware door. Pull is desired including sliding doors, pocket doors, and cabinet doors.
  • FP2000 - Solid Brass Oval Flush Pull
  • FP3000 - Solid Brass Rectangular Flush Pull with Optional Snap-In Plate
  • FP4000 - Solid Brass Rectangular Flush Pull with Removable Back Plate

Summit Series in S1 BLACK & US10B OIL RUBBED BRONZE FINISH

LEVERSETS WITH PUSH BUTTON LOCKING MECHANISM & AUTO RELEASE FEATURE
  • Grade 3, ANSI Standard A156.2
  • Easy Installation
  • Trim and Levers are Zinc Plated
  • Tubular Body, Concealed Screws for Amber and Apex Series, and Exposed Screws for Argo Series
  • With Push Button Locking Mechanism and Auto-Release Feature for Immediate Egress, Panic Exit Structure on Privacy Function Only
  • Square Rose is Standard
  • Round Rose Option for Amber and Apex Designs only