Distribution Centers | DKS Doors

323.888.6601

Back To Top

3D INVISIBLE HINGES

  • Zinc Alloy manufactured for oxidation resistance
  • Durable galvanized steel covers to conceal the screws
  • Used for wood and hollow metal doors
  • Easy 3D adjusting system
  • Easy installation and maintenance free
  • Complete reversibility (same slot on the door and the frame)
  • Total recessed hinge body (door and frame gap is very small)
  • CE Certified for 200,000 Opening / Closing Cycles
  • 100% Made in Italy
  • Elegant minimalistic design that is available in US1, US4, US10B,   US14, US15, US26, US26D and US28 finishes with no visible screws
   

Lites and Louvers in Prime Coat

  • For 3/16", 1/4", and 1" thick glass frames
  • For use in Fire-Rated door applications under positive and neutral pressure.
  • Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI CODE 0870 00.

Divided Reverse “Y” Blade, Inverted Louvers / Inverted Y-Blade Louvers

  • 90 Minute Fire Rated Steel Louvers
  • For use in fire-rated door applications under positive and neutral pressure Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), NFPA 252 (2012), CSI CODE 08 90 00 Louvers and Vents.

Adjustable Fusible Link Louvers

  • Recommended for use in rooms where ventilation is needed and at the same time isolating the room whenever fire is present.
  • When louver is exposed to heat at 165°F, the fusible link trips and the spring loaded louver blades shut to form an air tight fire and smoke seal.
  • WHI Listing Mark with a 60-90 Minutes Fire Rating is stamped on the frame of the louvers.
  • Installation is easy.
  • No need to drill holes for fasteners.
  • All screws are mounted on the room side leaving the corridor side free of fasteners for security purposes.
  • Fuses are replaceable.

Vision Lite Low/Standard Profile Kit

  • Vision Lite Frame
  • Glass types are Non-Fire Rated Tempered (¼”), Fire Rated PROTECT3™ Wired Safety (¼”) and Pyran® Platinum F Glass (3/16”)
  • Glazing Tape Combination
  • For use in fire rated door applications under positive and neutral pressure.
  • Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI CODE 0870 00.

CHALLENGER SERIES – SQUARE ROSE

For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.

  • BHMA Certified Lifetime Warranty, GRADE 2
  • Conforms with ANSI A 156.2 Series 4000, Standard Duty, Barrier Free,
  • UL listed 3-hour rating, conforms to standards UL10C and UBC 7-2-1997
  • Solid brass 6 pin “C” keyway cylinder, optional other keyways
  • Optional Interchangeable Core
  • Push in and turn button function
  • Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
  • Optional Tactile and Lead Lining
  • Meets the Buy American Act
   

CR271PC POCKET DOOR CLOSER APPLICATION

CR271PC is the CR441 Series’ Pocket Door Closer.  It is the same CR441 (cylinder) body specially re-engineered for pocket door closer applications. It uses a higher tensioned steel spring, combined with a high-performance hydraulic fluid to withstand high-demand performance applications. Due to the higher force required to open the door 180 degrees, a heavy duty lever forged steel arm was designed 1” longer than the standard CR441 arm for an extra smooth action.

DOOR VIEWERS IN US19 BLACK FINISH

DOOR VIEWERS Conforms to ANSI /  BHMA A156.16 L23172
  • DV90 Brass Door Viewer, 160° Plastic Lens Bore:  ½” For Doors:  1 ⅜” - 2 1/4” thick
  • DV91 Brass Door Viewer, 180° Plastic Lens Bore:  ½” For Doors:  1 ⅜” - 2” thick
  • DV180 Brass Door Viewer, 180° Plastic Lens Bore:  9/16” For Doors:  1 ⅜” - 2” thick
  • ULDV160 Brass Door Viewer, 160° Glass Lens UL-Listed for 90-minute Doors Bore:  ½” For Doors:  1 ⅜” - 2” thick
  • ULDV200 Brass Door Viewer, 200° Glass Lens UL-Listed for 90-minute Doors Bore:  9/16” For Doors:  1 ⅜” - 2 1/4” thick
 

Flush Pulls

Flush Pulls are used on any door with "flush with the door face", these pulls allow doors to slide in front of one another without getting hung up on the hardware door. Pull is desired including sliding doors, pocket doors, and cabinet doors.
  • FP2000 - Solid Brass Oval Flush Pull
  • FP3000 - Solid Brass Rectangular Flush Pull with Optional Snap-In Plate
  • FP4000 - Solid Brass Rectangular Flush Pull with Removable Back Plate