Distribution Centers | DKS Doors

323.888.6601

Back To Top
  • Overview
  • Features
  • Accessories
  • Cross References
  • Templates/Spec Sheets
  • Part Numbers

Overview

  • BHMA Certified Lifetime Warranty, GRADE 1
  • Conforms to federal specification type 86; and to all dimensional and operational performances of ANSI A156.13-1 80,  Series 1000, Extra Heavy Duty
  • UL listed 3-hour rating, conforms to standards UL10C and UBC 7-2-1997
  • Optional Interchangeable Core
  • Rust-proof heavy duty 2 ¾” backset lock case
  • Individual spring to prevent lever sag, easily reversible
  • Forged brass lever handles exceed requirements of ADA (American Disability Act)
  • Auxiliary latch bolt
  • Armored front plate conceals lock mounting screws
  • 1″ throw heavy duty deadbolt with anti-saw hardened pins
  • Heavy duty ¾” latch bolt with anti-friction latch, easily reversible
  • Optional Electrified Locks available
  • Conforms & Meets ADA Regulations

 

 

Features

  • For Doors – 1-3/4″ thick
  • Backset – 2-3/4″
  • Lockcase – Heavy gauge zinc chromate steel
  • Front – Heavy gauge steel 8″ x 1-1/4″ x 3/32″. Accommodates flat doors & doors beveled 1/8″ in 2″.
  • Armored Front – Wrought brass attached by machine screws to lockcase front
  • Deadbolt – 1″ throw, brass, chrome plated with hardened steel rollers
  • Latchbolt – Brass, chrome plated with heavy-duty deadbolt
  • Guardbolt – Extruded brass, chrome plated
  • Stopworks – Rocker type, brass, chrome plated
  • Strike – Brass, non-handed curved strike 4-7/8″ x 1 1/4″. Handed curved-up strike available upon request
  • Hand – Handed. Easily reversible in field
  • Trim – As specified
  • Cylinder – As specified
  • Keyway – As specified
  • Finishes – As specified
  • UL listings – U.L. Listed “A” Label (3 hour), for use on fire doors; single or pairs
  • ANSI – Lock body conforms to Federal Specification Type 86; and to all dimensional and operational performances of ANSI A156.13-1 80, Series 1000 Grade 1 Available with interchangeable core. Electrified locks available upon request.

Specifications

Accessories

Electrified Mortise Locks

Available on M8080 and M8453 functions (Storeroom only)

ElectrifiedPart #ELEC

FEATURES:

  • UL and CSFM Listings
  • Continuous duty solenoids for cooler operation during “continuously on” applications
  • Standard plug-in rectifier allows for an AC or DC power source
  • Low current draw
  • Numerous switch options
  • 3 year “No Hassle” warranty
  • OPTIONAL – Voltage requirement -12 VAC/DC or 24 VAC/DC
  • OPTIONAL – Amperage – 700mA @ 12V or 350mA @ 24V
  • OPTIONAL – Function – available “Fail Safe” (FS) or “Fail Secure” (FSE)

ADA Thumbturn

Optional Disability Turn (ADA) on applicable mortise locks.

Prefix “ADA” before Mortise lock PART#.

  • FOR 2″ up to 2 1/4″ Thick door – Order kit: SSMKIT214 – for sectional trim or SEMKIT214 – for escutcheon trim
  • LEAD LINING – Available on request. Prefix “LEAD” before PART#.
  • ANTI MICROBIAL COATING – Available on request on US26D and US32D finishes. Longer factory lead time usually applies. Prefix “ANTB” before PART#.

HOW TO CHANGE HANDING

  • Insert blade screwdriver into the oval slot behind latchbolt (green label).
  • Push latchbolt out until it is entirely away from the lockcase.
  • Rotate latchbolt to adjust handing.
  • Use blade screwdriver to push down the locking piece (green label) to end.
  • Handing is completely reversed.

Electrically Locked FS (Fail Safe)

NM8080FS

  • Outside knob/lever continuously locked by 24V AC or DC
  • Latch bolt retracted by key outside or knob/lever inside
  • Switch or power failure allows outside knob/lever to retract latch bolt
  • Auxiliary latch deadlocks latch bolt when door is locked
  • Inside knob/lever is always free for immediate egress

Electrically Unlocked FSE (Fail Secure)

NM8080FSE

  • Outside knob/lever unlocked by 24V AC or DC
  • Latch bolt retracted by key outside or knob/lever inside
  • Auxiliary latch deadlocks latch bolt when door is locked
  • Inside lever is always free for immediate egress

Electrically Locked or Electrically Unlocked Both Sides

NM8082FS

  • Outside and inside knob/lever continually locked electrically
  • Latch bolt retracted by key either side
  • Switch or power failure allows outside and inside knob/lever to retract latch bolt
  • Auxiliary latch deadlocks latch bolt when door is closed

NM8082FSE

  • Outside and inside knob/lever unlocked electrically
  • Latch bolt retracted by key either side
  • Switch or power failure keeps outside and inside knob/lever locked
  • Auxiliary latch deadlocks latch bolt when door is locked

Request to Exit (RX) Electrified Lock

NM8080FSE-RX/ NM8080FS-RX

  • Same as NM8080EL and NM8080EU functions
  • A micro switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/lever rotates the retractor hub
  • The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress

Privacy with Key Outside and “OCCUPIED” Indicator

NM8496

  • Deadbolt thrown or retracted by key outside or inside thumbturn
  • Knob/lever retracts latch bolt from either side
  • Throwing deadbolt locks outside knob/lever and displays “OCCUPIED” plate
  • Rotating inside knob/lever simultaneously retracts both deadbolt and latch bolt and unlocks outside knob/lever
  • Inside lever is always free for immediate egress

Faculty Restroom with Key Outside and “OCCUPIED” Indicator

NM8486

  • Latch bolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed
  • Deadbolt thrown or retracted by inside thumbturn
  • When deadbolt is thrown, “OCCUPIED” plate is displayed and all keys become inoperative except emergency keys
  • Turning inside knob/lever simultaneously retracts both deadbolt and latch bolt
  • Auxiliary latch deadlocks latch bolt when door is locked
  • Inside lever is always free for immediate egress

Privacy with Deadbolt, Coin Turn Outside and “OCCUPIED” Indicator

NM8445

  • Deadbolt thrown or retracted by inside thumbturn or outside coin turn
  • Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever
  • Latch bolt retracted by knob/lever from either side
  • Throwing deadbolt locks outside knob/lever and displays “OCCUPIED” plate
  • Rotating inside knob/lever simultaneously retracts deadbolt and latch bolt and unlocks outside knob/lever
  • Inside lever is always free for immediate egress

Cross References

Part Numbers