Distribution Centers | DKS Doors

323.888.6601

Back To Top
  • Overview
  • Features
  • Accessories
  • Cross References
  • Templates/Spec Sheets
  • Part Numbers

Overview

Extra Heavy Duty Mortise Locks with CLUTCH Free-wheeling

  • UL-listed for use on all fire doors, ANSI BHMA A156.13 – 2005, GRADE 1
  • Can retrofit Schlage L9000 Series mortise lock without drilling any additional holes on the door for sectional and escutcheon trims
  • Fully reversible design
  • No exposed mounting screws on outside and inside trims
  • Outside lever has a Clutch (Free-Wheeling design). The lever rotates when the lever is locked preventing excessive force
    from being applied to the horizontal lever. The design decreases the chance of the lever being broken or damaged
  • Lock body conforms to all dimensional and operational performances of ANSI A156.13, Grade 1, exceeds 1,000,000 cycles

Features

  • FOR DOORS – 1 ¾” (44.5mm) thick standard. For doors over 1 ¾” (44.5mm), specify door thickness
  • LOCK HAND – Lock bodies are easily field reversible, no need to specify hand when ordering
  • BACKSET & STRIKE – 2 ¾” (70mm) only backset. Brass or stainless steel strike; ANSI Standard A115.1; curve lip with dust box
  • LOCK CASE – Heavy Duty wrought steel, zinc dichromate plated
  • CENTER TO CENTER – Center of lever to center of cylinder is 3 7/8” (98mm)
  • ARMOR FACEPLATE – Brass or stainless steel; 8” x 1 7/32” (203mm x 31.3mm); ANSI Standard A115.1
  • DEADBOLT – 1” (25.4mm) throw; hardened stainless steel
  • LATCH BOLT – ¾” (19mm) throw; one-piece stainless steel with anti-friction reversible tongue
  • CYLINDER & KEYWAYS – 6-pin solid brass “C” keyway standard. Optional: Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59 / 60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders.
  • INTERCHANGEABLE CORE (IC) – Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Also available with SCHLAGE, CORBIN / RUSSWIN D-1 thru 4, SARGENT LA , and YALE GA Large Format Cylinders.
  • TOGGLE BUTTON – High rust-resistant chrome plated zinc alloy
  • MASTER KEYING – Can be master-keyed or grand master-keyed, construction keying available
  • FINISHES: US3, 4, 10, 10B, 15, 26, 26D, 32, 32D
  • AUXILIARY LATCH: Stainless Steel, non-handed

Specifications

Accessories

Electrified Mortise Locks

Available on M8080 and M8453 functions (Storeroom only)

ElectrifiedPart #ELEC

FEATURES:

  • UL and CSFM Listings
  • Continuous duty solenoids for cooler operation during “continuously on” applications
  • Standard plug-in rectifier allows for an AC or DC power source
  • Low current draw
  • Numerous switch options
  • 3 year “No Hassle” warranty
  • OPTIONAL – Voltage requirement -12 VAC/DC or 24 VAC/DC
  • OPTIONAL – Amperage – 700mA @ 12V or 350mA @ 24V
  • OPTIONAL – Function – available “Fail Safe” (FS) or “Fail Secure” (FSE)

ADA Thumbturn

Optional Disability Turn (ADA) on applicable mortise locks.

Prefix “ADA” before Mortise lock PART#.

  • FOR 2″ up to 2 1/4″ Thick door – Order kit: SCSKIT200 – for sectional trim or SCECKIT214 – for escutcheon trim
  • LEAD LINING – Available on request. Prefix “LEAD” before PART#.
  • ANTI MICROBIAL COATING – Available on request on US26D and US32D finishes. Longer factory lead time usually applies. Prefix “ANTB” before PART#.

HOW TO CHANGE HANDING

If the handing of the latchbolt does not match the door handing, remove the locking screw and pull latchbolt out from lock case, then turn 180°, making the bevel of the latchbolt face the opposite hand. Replace the latchbolt and fasten the locking screw.

Electrically Locked FS (Fail Safe)

 

SC8080FS

  • Outside knob/lever continuously locked by 24V AC or DC
  • Latch bolt retracted by key outside or knob/lever inside
  • Switch or power failure allows outside knob/lever to retract latch bolt
  • Auxiliary latch deadlocks latch bolt when door is locked
  • Inside knob/lever is always free for immediate egress

Electrically Unlocked FSE (Fail Secure)

SC8080FSE

  • Outside knob/lever unlocked by 24V AC or DC
  • Latch bolt retracted by key outside or knob/lever inside
  • Auxiliary latch deadlocks latch bolt when door is locked
  • Inside lever is always free for immediate egress

Electrically Locked or Electrically Unlocked Both Sides

SC8082FS

  • Outside and inside knob/lever continually locked electrically
  • Latch bolt retracted by key either side
  • Switch or power failure allows outside and inside knob/lever to retract latch bolt
  • Auxiliary latch deadlocks latch bolt when door is closed

SC8082FSE

  • Outside and inside knob/lever unlocked electrically
  • Latch bolt retracted by key either side
  • Switch or power failure keeps outside and inside knob/lever locked
  • Auxiliary latch deadlocks latch bolt when door is locked

Request to Exit (RX) Electrified Lock

SC8080FSE-RX/ SC8080FS-RX

  • Same as SC8080EL and SC8080EU functions
  • A micro switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/lever rotates the retractor hub
  • The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress

Privacy with Key Outside and “OCCUPIED” Indicator

SC8495

  • Deadbolt thrown or retracted by key outside or inside thumbturn
  • Knob/lever retracts latch bolt from either side
  • Throwing deadbolt locks outside knob/lever and displays “OCCUPIED” plate
  • Rotating inside knob/lever simultaneously retracts both deadbolt and latch bolt and unlocks outside knob/lever
  • Inside lever is always free for immediate egress

Faculty Restroom with Key Outside and “OCCUPIED” Indicator

SC8486

  • Latch bolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed
  • Deadbolt thrown or retracted by inside thumbturn
  • When deadbolt is thrown, “OCCUPIED” plate is displayed and all keys become inoperative except emergency keys
  • Turning inside knob/lever simultaneously retracts both deadbolt and latch bolt
  • Auxiliary latch deadlocks latch bolt when door is locked
  • Inside lever is always free for immediate egress

Privacy with Deadbolt, Coin Turn Outside and “OCCUPIED” Indicator

SC8445

  • Deadbolt thrown or retracted by inside thumbturn or outside coin turn
  • Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever
  • Latch bolt retracted by knob/lever from either side
  • Throwing deadbolt locks outside knob/lever and displays “OCCUPIED” plate
  • Rotating inside knob/lever simultaneously retracts deadbolt and latch bolt and unlocks outside knob/lever
  • Inside lever is always free for immediate egress

Cross References

Part Numbers